How do I change the termperature range that my FLIR A310pt operates in?

If you do not use FLIR Sensor Manager and want to change the temperature range, perform these steps:

1. Start up the web interface and log in.
2. Press the Advanced button at the bottom right. This will open up a console under the live stream.
3. Start by typing
   IRNucTableCountGet
   then press enter. This will display how many ranges the camera has. To display what each range represents, type
   IRNucTableNameGet&Index=0
   to show what index 0 represents,
   IRNucTableNameGet&Index=1
   to show what index 1 represents, and so on.
4. Once you know which index you want to change to, type
   IRNucTableSet&NUC_Index=0
   and press enter to change to index 0 (or use the index number of your choice instead ).

To display the temperature range you are in at present, type IRNucTableGet, then press enter.